Description
PDS500G works with all modern automotive and industrial oscilloscopes, and it is not limited to the Ditex CarScope series lab scopes.
Usually each diagnostic test requires different pressure transducer but the PDS500G eliminates this need by giving you one ultra-high-resolution transducer that can be used for an analysis on many automotive systems.
PDS500G features auto zeroing and an extremely fast 100 µS response time from 10% to 90% of full scale. This allows an accurate measurement of rapidly changing signals within a broad pressure range.
An optional absolute pressure transducer PDS500A is availabe too. You can also order a conversion factor other than the specified one. For example: 500 psi = 5 V or 34.5 bar = 3.45 V
Note: This set does not include adapters for petrol or diesel engines in-cylinder pressure testing and fuel pressure testing. Additional adapters and extensions are available in the complete kit.
Demonstration
Check out the following video for a detailed look at the in-cylinder analysis with the Ditex PDS500x pressure transducer. This analysis helps to determine the proper synchronization between the crankshaft and the camshafts.
Measurement and comparison of cylinder pressure values at fixed points
provides real-time data that can be very helpful in determining engine
health.
Features:
- Accurately measure up to 500 psi (34 bar)
- Ultra-fast 100 µS response time
- Auto zeroing
- Wide output dynamic range for greater accuracy
- Powered by car battery
- High noise immunity
- Temperature compensated
- Gauge pressure sensor (optional absolute pressure sensor available)
- Resistant to corrosive environments
- 3x pressure overload
- Compact and durable housing
Specifications
| Pressure type | Gauge (optional: absolute) |
| Pressure range | -14,5 ÷ 500 psi (-1 ÷ 34.5 bar) |
| Output range | -250 ÷ 10,000 mV analog |
| Output scaling | 20 mV/1 psi (500 psi = 10 V) |
| Supply voltage | 11 ÷ 28V DC (from car battery) |
| Accuracy | ±1.0% of scale |
| Pressure Nonlinearity | ±0.3% |
| Operating Temperature Range | -20 to +100 °C |
| Compensated Temperature Range | -20 to +85 °C |
| Response time | 100 µs (10% to 90% step pressure change) |
| Electrical connection (pressure sensor) | 3 pin male XLR |
| Electrical connection (oscilloscope) | BNC connector |
| Electrical connection (power supply) | 2 “crocodile” type clips |
| Dual function cable length | 1,5 meters |
| Pressure connection – thread type | G 1/4 female (1/4-19 BSPP Female) |
| Pressure connection – thread depth | 8 mm (0.315”) |
| Pressure connection – spanner/wrench size | 19 mm (3/4”) |
| Weight (set) | 0.65 kg |
In The Set:
- PDS500G Automotive Pressure Transducer
- Dual function cable:
Power supply – 2“ crocodile” type clips
Oscilloscope electrical connection – BNC connector -
Thread adapter for pressure connectionG 1/4″ male to 1/8″-27 female NPT (USA only)
For quick couplers such as Foster 2 series, as well as other quick couplers with 1/8-27 NPT thread.
- Thread adapter for pressure connection
G 1/4″ male to G 1/8″ female brass adaptor (Rest of the world)
This adapter is needed when using the quick couplers provided in the Advanced Pressure Diagnostic Kit. Note: Additional adapters and extensions are also available in the Advanced Pressure Diagnostic Kit.
Reviews
There are no reviews yet.